|
Jumpnow Consulting Services on Gumstix Technology |
|
Providing custom software development services to augment your project team or to provide a complete application solution.
Experience writing custom device drivers for the following Gumstix Overo controllers / systems
- SPI, I2C, GPIO - userland and kernel module drivers for many devices
- PWM - servo control
- McBSP - Frame-Sync protocol for a high-speed multi-channel ADC
- ISP - camera driver for one Micron sensor, currently developing another and some additional work with the OmniVision sensors
Application development including networking and image processing using OpenCV on the Gumstix.
Experience with most of the Overo COMs and expansion boards and able to assist with configuring, building and deploying your application using the OE development tools.
Contact information can be found here.
|
|
Last Updated on Saturday, 05 February 2011 13:28 |
|
|
Thursday, 14 June 2012 16:47 |
|
While developing the new SyntroZigbeeGateway component, I used Gumstix and BeagleBone boards extensively. Here are some notes I've collected for working with Zigbee radios and Gumstix COMs.
|
|
Read more...
|
|
Syntro, Gumstix and Three Webcams |
|
As we get closer to releasing Syntro, I'm continuously looking for more test platforms.
Particularly desirable are machines without fans.
|
|
Read more...
|
|
|
Building Gumstix images with the Yocto Project |
|
Some notes on building custom BSP images for the Gumstix® small board computers using tools from the Yocto Project.
|
|
Last Updated on Thursday, 25 April 2013 13:51 |
|
Read more...
|
|
Streaming video with Gumstix, GStreamer and the DSP |
|
Instructions for setting up a Gumstix to network stream video taking advantage of the DSP for encoding.
|
|
Last Updated on Sunday, 26 February 2012 16:00 |
|
Read more...
|
|
|
|
|
|
|
Page 1 of 3 |
Gumstix